Recovery Base 2.0
The RECOVERY BASE 2.0 isn't just a mattress - it's a regeneration system designed from the inside out.We've combined innovative materials and ergonomic design to ensure each layer works together to relieve pressure and support your body's natural processes for a truly restorative sleep.
90 nights with your Base. Sleep on it first! Since it takes a little time to get used to a new mattress, we give you 90 nights to test it. Make yourself comfortable at home on the mattress. And if it's not right for you, we'll pick up the mattress from you free of charge.
The top of the cover (Softtouch Recovery Cover) is washable at 60°C and must not be ironed, bleached, or tumble dried.
Care instructions:
- Open the zipper completely and separate the lying surface, i.e., the top of the cover, from the bottom with the anti-slip coating from the rest of the cover.
- Wash the rest of the cover on a gentle cycle. Please use mild detergent.
- Use lower temperatures than specified to save energy.
- Allow the cover to air dry.
CAUTION: The foam core, topper, and underside of the cover are not machine washable.
CELLIANT® fiber is approved in the EU as a Class I medical device because it is a supportive agent for promoting blood circulation and oxygen supply to tissues. The effect is temporary and not long-term.
This also applies to our mattress cover. The UDI-DI is: ++G3391200000.
- Manufacturer: Hologenix LLC. Suite A420, 17383 West Sunset Blvd, Pacific Palisades, CA90272, USA.
- Distributor: BLACKROLL AG, Hauptstrasse 17, CH-8598 Bottighofen
- EU Authorized Representative: Advena Limited. Tower Business Centre, 2nd Floor, Tower Street, Swatar, BKR 4013, Malta
Our mattress complies with OEKO TEX® STANDARD 100, Class 1 – the highest OEKO TEX® STANDARD – and is therefore also suitable for babies.
The RECOVERY BASE 2.0 is a multi-talent when it comes to hardness levels. You can choose between a total of 8 different configurations with varying degrees of hardness.
The foam core consists of two different foam layers. One hard side (purple) and one soft side (green). If you compare the firmness rating with other manufacturers, the green side corresponds to a firmness rating of H2 and the purple side to a firmness rating of H4. Depending on how you turn the core, you can sleep on the hard or soft side. In addition, both foam layers feature a special cut pattern for side sleepers, allowing the shoulders and pelvis to sink in. If you primarily sleep on your back or stomach, you can rotate the core 180 degrees so that your upper body rests on the supportive part.
By simply turning and flipping the mattress, you can experience 4 different firmness levels. In addition, you have the option of placing the integrated Softbalance topper on top. The integrated topper allows the mattress to conform to the contours of your body and provides pressure relief. With the optional use of the topper, the RECOVERY BASE 2.0 offers 8 different configuration options.
The RECOVERY BASE 2.0 is produced in Germany.
- Foam core & topper: 100% polyurethane
- Cover top & side walls: 100% polyester
- Filling: 100% polyester
- Cover bottom: 95% polyester / 5% polypropylene
The RECOVERY BASE 2.0 mattress is available in the following sizes:
- 80 × 200 cm (15.2 kg)
- 90 × 200 cm (16.8 kg)
- 100 × 200 cm (19.0 kg)
- 120 × 200 cm (22.1 kg)
- 140 × 200 cm (31.2 lbs)
The foam core is 19 cm high and the topper is 3 cm high.
The RECOVERY BASE 2.0 is a universal mattress and suitable for all types of beds. It is compatible with box spring beds, slatted frames, loft beds, and more.
Soft-Touch Recovery Cover
Soft, comfortable cover that supports your recovery
The Softtouch Recovery Cover combines a breathable double-layer knit with CELLIANT® fibers and soft hollow-fiber padding. The result: a noticeably softer feel when lying down, improved thermoregulation, and optimized moisture control—all wrapped in a high-quality, removable cover. The Softtouch Recovery Cover can be attached to the Gripframe via the zipper and removed for easier care.
The RECOVERY BASE 2.0 is more than just a mattress—it’s a sophisticated recovery system
Innovative materials and ergonomic design work together, layer by layer, to relieve pressure and create a sleeping environment where your body can truly recover. Because good sleep starts with the right temperature.
When your body neither overheats nor gets too cold at night, it can regenerate optimally. The Softtouch Recovery Cover combines a breathable double-layer knit with soft hollow-fiber padding and integrated CELLIANT® fibers. This creates an exceptionally comfortable sleeping experience with effective thermoregulation and moisture control—for a consistently comfortable sleeping environment.
How does it work? The fabric contains tiny, naturally occurring minerals that are firmly integrated into the fibers. They absorb your body heat and reflect it back to your body as infrared energy—similar to modern infrared technologies, but without using any electricity. Your body provides the energy itself—and at the same time uses it to regulate its temperature and help you get the most out of your sleep. The high-quality cover is removable and easy to care for, and can be attached directly to the Gripframe via the zipper.
FAQ
Our Dualcore foam core has a density of 37 kg/m³ with two different compression resistances. The green side has a lower compression resistance, while the purple side has a higher one. The Softbalance topper has a density of 47 kg/m³.
Of course. However, with the 140 cm wide mattress, it’s easier if you have a second person help you. In our configurator, we’ll help you choose your personal comfort option.
Yes. After all, we want to make it as easy as possible for you and not keep you from getting a good night’s sleep: The ends of the foam cores are numbered from 1 to 4.
For production reasons, the mattress is always delivered to you in the following configuration: The soft foam core (green) is on top, and the topper is placed over the foam cores at the very top. This is the softest configuration of the RECOVERY BASE 2.0. Once you’re home, you can easily reconfigure the mattress to suit your individual preferences.
The RECOVERY BASE is a universal mattress and suitable for all types of beds. It’s compatible with box spring beds, slatted frames, loft beds, and more. We recommend that you avoid placing the mattress directly on the floor if possible, as this restricts air circulation and can negatively affect your sleep environment.
Yes. Body heat is absorbed by textiles and reflected back to the body, even through multiple layers of fabric. In the case of CELLIANT®, the minerals in the fibers reflect infrared heat back to the body. Learn more about CELLIANT® technology.
Simply place the topper at the very bottom of the mattress cover, underneath the foam core. And if you ever feel like some extra comfort, just pull the topper up and place it on top of the foam core.
Yes. Our mattress also provides a restful BASE for all the little ones.
Yes. Washing the mattress cover regularly at 60°C removes dust mites and dust. Regular vacuuming with an upholstery attachment also helps.
The mattress is rolled up and shipped as a standard package.
In the 160x200 and 180x200 sizes, the RECOVERY BASE 2.0 is designed so that both sides can be customized individually. It consists of two separate cores and toppers that can be configured differently—for example, softer or firmer.
This allows two people with different sleep needs to lie comfortably. A shared cover connects both sides to form a continuous sleeping surface. This creates a uniform sleeping experience without a gap between the two sides or any slipping.
Since it takes a little time to get used to a new mattress, we give you 90 nights to test it out. Make yourself really comfortable on the mattress at home. And if it’s not the right fit for you, we’ll pick up the mattress from your home free of charge. You can find more information about the 90-day trial here.
We offer a 10-year warranty on the BLACKROLL® RECOVERY BASE. This warranty covers the shape retention and durability of the mattress core materials, but not the cover. The cover is covered by the legally required 2-year warranty. You canfind all the detailed information inour Terms and Conditions.
Yes, you can find all safety instructions in the manual.